Интеграция SATA драйверов в Windows - 57 страница

Вот Да семерки у меня нет. Я её снес. Вот небольшая новость, я нашел в наборе драйверов от ноутбука такие файлы (с помощью файла readme в котором описан весь список имеющихся дров):
--IRST -Intel® SATA AHCI Controller Driver for Windows 7 (V10.0.0.1046)
В этой папке: "буква_диска/IRST/WIN7_32" есть такие файлы:
2KSETUP.EXE, 2KSETUP.INI, F6README.TXT, IAAHCI.CAT, IAAHCI.INF, IASTOR.CAT, IASTOR.INF, IASTOR.SYS, LICENSE.TXT, TXTSETUP.OEM.

В файде F6README.TXT такое содержимое (извините, что сюда пишу, прикрепить файл не удалось, формат не поддерживает):
-------

************************************************************
************************************************************
* Installation Readme for
* Intel(R) Rapid Storage Technology (Intel(R) RST).
*
* Refer to the system requirements for the operating
* systems supported by Intel Rapid Storage Technology.
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
************************************************************
************************************************************

************************************************************
* Intel is making no claims of usability, efficacy or
* warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained
* herein completely defines the license and use of this
* software.
************************************************************


************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

1. Overview
2. System Requirements
3. Language Support
4. Determining the System Mode
5. Installing the Software
6. Verifying Installation of the Software
7. Advanced Installation Instructions
8. Identifying the Software Version Number
9. Uninstalling the Software
10. Entering the Option ROM User Interface
11. Option ROM RAID Volume Management
12. Options to RESET the RAID volume in Option ROM
13. Verifying the Version of the Option ROM Software


************************************************************
* 1. OVERVIEW
************************************************************
Intel(R) Rapid Storage Technology is designed to provide
functionality for the following Storage Controllers:
RAID Controllers:
- Intel(R) ICH8M-E/ICH9M-E/5 Series SATA RAID Controller
- Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Series SATA RAID Controller
- Intel(R) ESB2 SATA RAID Controller
- Intel(R) ICH7MDH SATA RAID Controller
- Intel(R) ICH7R/DH SATA RAID Controller

AHCI Controllers:
- Intel(R) 5 Series/3400 Series SATA AHCI Controller
- Intel(R) 5 Series 4 Port SATA AHCI Controller
- Intel(R) 5 Series 6 Port SATA AHCI Controller
- Intel(R) ICH10D/DO SATA AHCI Controller
- Intel(R) ICH10R SATA AHCI Controller
- Intel(R) EP80579 SATA AHCI Controller
- Intel(R) ICH9M-E/M SATA AHCI Controller
- Intel(R) ICH9R/DO/DH SATA AHCI Controller
- Intel(R) ICH8M-E/M SATA AHCI Controller
- Intel(R) ICH8R/DH/DO SATA AHCI Controller
- Intel(R) ESB2 SATA AHCI Controller
- Intel(R) ICH7M/MDH SATA AHCI Controller
- Intel(R) ICH7R/DH SATA AHCI Controller

************************************************************
* 2. SYSTEM REQUIREMENTS
************************************************************

1. The system must contain an Intel(R) Core(TM), Intel(R) Core(TM)2,
Intel(R) Pentium(R), Intel(R) Xeon(R), Intel(R) Atom(TM),
or Intel(R) Celeron(TM) branded processor and one of the Intel
products listed in section 1 above.


2. The system must be running on one of the following
operating systems:
- Microsoft Windows 7*
- Microsoft Windows 7* x64-bit Edition**
- Microsoft Vista*
- Microsoft Vista* x64-bit Edition**
- Microsoft Windows Server* 2008
- Microsoft Windows Server* 2008 x64-bit Edition**
- Microsoft Windows XP* Home Edition
- Microsoft Windows XP* Professional
- Microsoft Windows XP* x64-bit Edition**
- Microsoft Windows Server* 2003
- Microsoft Windows Server* 2003,
Web x64-bit Edition**
- Microsoft Windows Server* 2003,
Standard x64-bit Edition**
- Microsoft Windows Server* 2003,
Enterprise x64-bit Edition**
- Microsoft Windows Media Center* Edition


3. The following operating systems are not supported:

Any version of the following Microsoft operating systems:
- MS-DOS
- Microsoft Windows 3.1*
- Microsoft Windows NT 3.51*
- Microsoft Windows 95*
- Microsoft Windows 98*
- Microsoft Windows Millennium Edition* (Me)
- Microsoft Windows NT 4.0*
- Microsoft Windows 2000 Datacenter Server*
- Microsoft Windows 2000* Professional
- Microsoft Windows 2000* Advanced Server

Any version of the following operating systems:
- Linux*
- UNIX*
- BeOS*
- MacOS*
- OS/2*


4. The system should contain at least the minimum system
memory required by the operating system.

5. The 'Intel(R) Chipset Software Installation Utility'
must be installed prior to installing
Intel(R) Rapid Storage Technology.



* Other names and brands may be claimed as the property of others.
** If the system is running Windows* 64-bit version,
the Intel(R) Rapid Storage Technology driver supporting
64-bit must be used.

************************************************************
* 3. LANGUAGE SUPPORT
************************************************************

Below is a list of the languages (and their abbreviations)
for which the Intel Rapid Storage Technology software has
been localized. The language code is listed in parentheses
after each language.

ARA: Arabic (Saudi Arabia) (0401)
CHS: Chinese (Simplified) (0804)
CHT: Chinese (Traditional) (0404)
CSY: Czech (0405)
DAN: Danish (0406)
NLD: Dutch (0413)
ENU: English (United States) (0409)
FIN: Finnish (040B)
FRA: French (International) (040C)
DEU: German (0407)
ELL: Greek (0408)
HEB: Hebrew (040D)
HUN: Hungarian (040E)
ITA: Italian (0410)
JPN: Japanese (0411)
KOR: Korean (0412)
NOR: Norwegian (0414)
PLK: Polish (0415)
PTB: Portuguese (Brazil) (0416)
PTG: Portuguese (Standard) (0816)
RUS: Russian (0419)
ESP: Spanish (0C0A)
SVE: Swedish (041D)
THA: Thai (041E)
TRK: Turkish (041F)


************************************************************
* 4. DETERMINING THE SYSTEM MODE
************************************************************

To use this Readme effectively, you will need to know what
mode your system is in. The easiest way to determine the
mode is to identify how the SATA controller is
presented within the Device Manager. The following
procedure will guide you through determining the mode.
1. On the Start menu, select Control Panel.

In Microsoft Windows XP*:

2. Double-click 'System' from the Classic View.

3. Select the 'Hardware' tab.

4. Click 'Device Manager'.

5. In the Device Manager window, look for an entry named
SCSI and RAID Controllers. If this entry is present,
expand it and look for one of the controllers listed
in the Overview Section 1. If the controller identified is
a RAID controller, then the system is in RAID mode.


In Microsoft Windows Vista* or higher:

2. Double-click 'System' from the Classic View (or the
small or large icon view in Microsoft Windows 7*).

3. Select 'Device Manager' in the left pane.

4. In the Device Manager window, look for an entry named
Storage Controllers. If this entry is present, expand it
and look for one of the controllers listed
in the Overview Section1. If the controller identified is
a RAID controller, then the system is in RAID mode.


If none of the controllers above are shown,
then the system is not running in RAID mode and
you should continue with step 6 below.

6. From the Device Manager, look for an entry named
'IDE ATA/ATAPI controllers'. If this entry is present,
expand it and look for one of the controllers listed
in the Overview Section1. If an AHCI controller is
identified, then the system is in AHCI mode.

If none of the controllers above are shown, then
your system is not in AHCI mode. No other modes are
supported by Intel(R) Rapid Storage Technology
and you should continue with step 7 below.

7. Your system does not appear to be running in RAID or
AHCI mode. If you feel that your system is running in
RAID or AHCI mode and you do not see any of the
controllers listed above, you may choose to contact
your system manufacturer or place of purchase for
assistance.


************************************************************
* 5. INSTALLING THE SOFTWARE
************************************************************

5.1 General Installation Notes

1. If you are installing the operating system on a system
configured for RAID or AHCI mode, you must pre-install
the Intel(R) Rapid Storage Technology driver using the
F6 installation method described in section 5.3.

2. The 'Intel(R) Chipset Software Installation Utility'
must be installed on the system after a supported
Microsoft Windows* operating system has been installed.

3. To install Intel(R) Rapid Storage Technology,
double-click on the self-extracting and self-installing
setup file and answer all prompts presented.

4. By default, all installed files (readme.txt, help, etc.)
are copied to the following path:

<bootdrive>\Program Files\Intel\Intel(R) Rapid Storage Technology


5.2 Windows Automated Installer* Installation from Hard
Drive or CD-ROM

Note: This method is applicable to systems configured for
RAID or AHCI mode.

1. Download the Intel(R) Rapid Storage Technology setup file
and double-click to self-extract and to begin the setup
process.

2. The Welcome window appears. Click ‘Next’ to continue.

3. The Uninstallation Warning window appears. Click ‘Next’
to continue.

4. The Software License Agreement window appears. If you
agree to these terms, click ‘Yes’ to continue.

5. The Readme File Information window appears. Click ‘Next’
to continue.

6. The Choose Destination Location window appears.
Click ‘Next’ to continue.

7. The Select Program Folder window appears. Click ‘Next’
to continue installing the driver.

8. If the Windows Automated Installer* Wizard Complete window
is shown without a prompt to restart the system, click
‘Finish’ and proceed to step 9. If it is shown with a
prompt to restart the system, select ‘Yes, I want to
restart my computer now.’ (selected by default) and
click ‘Finish’. Once the system has restarted,
proceed to step 9.

9. To verify that the driver was loaded correctly, refer
to section 6.


5.3 Pre-Installation Using the F6 Method.

Note: The Steps 1 and 2 can be skipped if you use the F6 Floppy
disk utility provided by Intel. These methods
are applicable to systems configured for RAID or
AHCI mode.

1. Extract all driver files from the installation package.
See section 7.2 for instructions on extracting the
files.

2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.

* Note: For Windows Vista*, you can use a floppy, CD/DVD or USB.

3. For Microsoft Windows XP*:

- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.

- When prompted, select 'S' to Specify Additional Device.

- Continue to step 5.

4. For Microsoft Windows Vista*:

- During the operating system installation, after selecting the
location to install Vista, click Load Driver to
install a third party SCSI or RAID driver.

- Continue to step 5.

5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.

6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.

7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.

8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.


************************************************************
* 6. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************

6.1 Verifying Have Disk, F6, or Unattended Installation:
depending on your system configuration, refer to the
appropriate sub-topic below:


6.1a Systems Configured for RAID Mode:

1. On the Start menu, select Control Panel.
2. Open the 'System' applet (you may first
have to select 'Switch to Classic View').
3. Select 'Hardware'.
4. Click 'Device Manager'.
5. Expand the 'Storage Controllers' entry (for Windows Vista* or later) or
'SCSI and RAID Controllers' entry (for Windows XP*).
6. Right-click on Intel(R) SATA RAID Controller.
7. Select 'Properties'.
8. Select the 'Driver' tab.
9. Click 'Driver Details'.
10. If the 'iaStor.sys' file is displayed, the installation
was successful.


6.1b Systems Configured for AHCI Mode:


1. On the Start menu, select Control Panel.
2. Open the 'System' applet (you may first
have to select 'Switch to Classic View').
3. Select'Hardware'.
4. Click 'Device Manager'.
5. Expand the 'IDE ATA/ATAPI controllers' entry.
6. Right-click on Intel(R) SATA AHCI Controller.
7. Select 'Properties'.
8. Select the 'Driver' tab.
9. Click 'Driver Details'.
10. If the 'iaStor.sys' file is displayed, the installation
was successful.


6.2 Verifying Microsoft Windows Automated Installer* or 'Package for
the Web' Installations:

1. Click Start.
2. Locate and select 'Intel(R) Rapid Storage Technology'.
3. The Intel Rapid Storage Technology application should
launch.
4. If the application does not launch, the Intel(R)
Rapid Storage Technology driver was not installed
properly and setup needs to be run.

************************************************************
* 7. ADVANCED INSTALLATION INSTRUCTIONS
************************************************************

7.1 Available Setup Flags:

-? The installer presents a dialog showing
all the supported setup flags (shown
here) and their usage, then quits without
installing.
-A Extracts driver and readme files (does
not install driver) to <path> if -P is also
supplied; otherwise, the files are
extracted to the default location.
-B The installer will automatically reboot without
prompting after the installation completes. This
is only applicable when used with the -s switch.
-G <LCID> Forces a particular language install
(See section 3 for a table mapping
<LCID> to language).
-Nodrv Does not install Intel(R) RST driver.
-Noicc Does not install the Intel(R) Control Center (Intel(R) CC).
-NoIRSTGUI Does not create a start menu shortcut for the
UI console. Using this switch also disables Intel(R) CC
installation. Intel(R) CC is not removed if it is already
installed.
-Noservice Does not install the Event Monitor Service. This means
that UI components also do not get installed.
-Notray Prevents the monitor applet from launching on
every reboot.
-Overwrite The installer will downgrade without interaction
from the user.
-P <path> Changes default directory location for application
files and supplies target path when combined with
-A flag.
-report <path> Changes the default log path.
-S Silent install (no user prompts or Intel RST user interface
display). If used in combination with -B, the installer
will automatically reboot.
-ver Displays driver versions.


Notes: Flags and their parameters are not case-sensitive.
Flags may be supplied in any order, with the
exception of the -S and -G, which must be
supplied last. When using the -A flag, a target
path may be specified via the -P flag,
-G, -S, and -N flags are ignored. When using the
-P flags, there should be space
between the flag and the argument.

7.2 Use one of the following command examples to extract the
driver files from the different package types:

c:\iata_cd.exe -a -a -p c:\<path>
c:\iata_enu.exe -a -a -p c:\<path>
c:\setup.exe -a -p c:\<path>

When the command is run, the installer executes and a prompt will
display to confirm that files were extracted successfully; This
will not install the driver; it will only extract the driver files
to <path>. After the extraction is completed, the driver
files can be found in <path>\Driver.

7.3 To install the RAID driver on Microsoft Windows XP*, as outlined in the Microsoft
document 'Deployment Guide Automating Windows NT Setup',
use the supplied TXTSETUP.OEM file included in this
package and insert the lines shown in step 7.3a and
7.3b below into the UNATTEND.TXT file. This method is
available for Microsoft Windows XP* and
Windows Server* 2003. Before you begin, iaAhci.inf,
iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and
Txtsetup.oem files will need to be extracted from the
setup files. To extract these files, use the method
described in section 7.2 above.

7.3a Systems Configured for RAID Mode
Note: An example is shown below. Depending upon your system
hardware configuration, please update the text
with the correct RAID controller name using the list in the
Overview (Section 1) of this document.

// Insert the lines below into the UNATTEND.TXT file

[MassStorageDrivers]
"Intel(R) 82801IR/IO SATA RAID Controller" = OEM

[OEMBootFiles]
iaStor.inf
iaStor.sys
iaStor.cat
Txtsetup.oem


7.3b Systems Configured for AHCI Mode

Note: An example is shown below. Depending upon your system
hardware configuration, please update the text
with the correct AHCI controller name using the list in the
Overview (Section 1) of this document.

// Insert the lines below into the UNATTEND.TXT file

[MassStorageDrivers]
"Intel(R) 82801IR/IO SATA AHCI Controller" = OEM

[OEMBootFiles]
iaAhci.inf
iaStor.sys
iaAhci.cat
Txtsetup.oem

************************************************************
* 8. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************

8.1 Use the following steps to identify the software version
number following a Have Disk, F6, or unattended
installation.


8.1a Systems Configured for RAID Mode:

1. On the Start menu, select Control Panel.
2. Open the 'System' applet (you may first
have to select 'Switch to Classic View').
3. Select 'Hardware'.
4. Click 'Device Manager'.
5. Expand the 'SCSI and RAID Controllers' entry.
6. Right-click on the Intel(R) RAID Controller present.
7. Select 'Properties'.
8. Select the 'Driver' tab.
9. The software version should be displayed after
'Driver Version:'.


8.1b Systems Configured for AHCI Mode:

1. On the Start menu, select Control Panel.
2. Open on the 'System' applet (you may first
have to select 'Switch to Classic View').
3. Select 'Hardware'.
4. Click 'Device Manager'.
5. Expand the 'IDE ATA/ATAPI controllers' entry.
6. Right-click on the Intel(R) SATA AHCI Controller present.
7. Select 'Properties'.
8. Select the 'Driver' tab.
9. The software version is displayed after
'Driver Version:'.


8.2 Identify the software version for Windows Automated
Installer* or 'Package for the Web' Installations:

1. Click Start.
2. Locate and select 'Intel(R) Rapid Storage Technology'.
3. The Intel(R) Rapid Storage Technology application should
launch.
4. From the application, click ‘Help’. The Help user interface should launch.
5. From the Help window, click ‘About’. The software version is displayed.



************************************************************
* 9. UNINSTALLING THE SOFTWARE
************************************************************

9a. UNINSTALLATION OF NON-DRIVER COMPONENTS
The removal of this software from the system will render any
SATA disks inaccessible by the operating system;
therefore, the uninstallation procedure will only uninstall
non-critical components of this software (user interface,
start menu links, etc.). To remove critical components, see
section 9b.

Use the following procedure to uninstall the software:

1. On the Start menu, select Control Panel.
2. Click ‘Add or Remove Programs’ (for Windows XP*) or
‘Uninstall a program’ (for Windows Vista* or higher). Locate and
select Intel(R) Rapid Storage Technology.
3. Click ‘Remove’ (for Windows XP*) or right-click the application
name, and then click ‘Uninstall’ (for Windows Vista* or higher).
4. The uninstall program will start. Click through the
options for the uninstallation.

9b. UNINSTALLATION OF DRIVER COMPONENTS
The removal of this software from the system will render any
SATA disks inaccessible by the operating system.
Back up any important data before completing these steps.

1) If the system is in RAID mode, delete any RAID volumes
using the Intel(R) Rapid Storage Technology - option ROM
user interface.
2) Reboot the system.
3) Enter the system BIOS (usually done by pressing a key
such as 'F2' or 'Delete' during system boot).
4) Disable 'Intel(R) RAID Technology' and 'SATA AHCI mode'.
5) Reinstall the operating system.

Note: If you experience any difficulties making these
changes to the system BIOS, please contact the motherboard
manufacturer or your place of purchase for assistance.

************************************************************
* 10. ENTERING THE OPTION ROM USER INTERFACE
************************************************************

Use the following steps to enter the Intel(R) Rapid Storage Technology
Manager - option ROM user interface:

1. Boot the system.
2. Press CTRL-I when the
'Intel(R) Rapid Storage Technology - option ROM vX.y.w.zzzz'
banner screen appears.

************************************************************
* 11. OPTION ROM RAID VOLUME MANAGEMENT
************************************************************
The Intel(R) Rapid Storage Technology - option ROM provides
pre-OS RAID volume management which enables the following:

1. Create RAID Volume
Use this option to create one or two RAID volumes.

2. Delete RAID Volume
Use this option to delete a RAID volume.

3. Reset Disks to Non-RAID
Use this option to reset a RAID configuration to a
non-RAID configuration.

4. Recovery Volume Options
If a recovery volume is present, use this option to
a. Disable Continuous Update
b. Enable Only Recovery Disk
c. Enable Only Master Disk


************************************************************
* 12. OPTIONS TO RESET THE RAID VOLUME IN OPTION ROM
************************************************************
Intel(R) Rapid Storage Technology - option ROM user interface provides
two methods for resetting the RAID volume:
1. Delete RAID Volume
2. Reset Disks to Non-RAID
Differences between the options are noted below. Users are
advised to select the option based on the situation.

12.1 Delete RAID Volume

When a RAID volume is deleted, RAID metadata on the
participating disks is erased and sector zero is cleared;
as a result, the partition table and file system related data
are reset. Windows installer will not see any invalid data
at the time of OS installation. This is the recommended
method for reconfiguring the RAID volume and installing OS
on it.

12.2 Reset Disks to Non-RAID

This option is used to reset the metadata on the disk which
participates in more than one RAID volume in single
operation. It should be used if 'Delete RAID Volume' option
fails for any reason and to reset a disk that has been
marked as Spare and offline member. When a disk in the RAID
volume is reset to non-RAID, RAID metadata is erased.
However, partition table and file system related data still
exists, which may be invalid. This might cause Windows
installer to misinterpret the information available on the
'reset disk' at the time of installation. This could result
in unexpected behavior in OS installation.


************************************************************
* 13. VERIFYING THE VERSION OF THE OPTION ROM SOFTWARE
************************************************************

1. Use the following steps to identify the version number of
the Intel(R) Rapid Storage Technology - option ROM:

- Enter the Intel(R) Rapid Storage Technology - option ROM user
interface using the steps detailed in section 10.
- The software version will be displayed in the user
interface banner:
'Intel(R) Rapid Storage Technology - option ROM X.y.w.zzzz'

X.y.w.zzzz is the version number of the option ROM
installed on your system.
X.y.w - Product release number
X - Major number
y - Minor number
w - Hotfix number
zzzz - Build number

************************************************************
* DISCLAIMER
************************************************************

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS.
NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS
PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL
ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY
OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER
INTELLECTUAL PROPERTY RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT
DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL
PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel may make changes to specifications and product descriptions at any
time, without notice. Designers must not rely on the absence or
characteristics of any features or instructions marked "reserved" or "undefined".
Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from
future changes to them. The information here is subject to change without
notice. Do not finalize a design with this information.

The products described in this document may contain design defects or
errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on
request.

Contact your local Intel sales office or your distributor to obtain the
latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this
document, or other Intel literature, may be obtained by calling
1-800-548-4725, or go to: http://www.intel.com/#/en_us_01

Intel(R) is a trademark of Intel Corporation in the U.S. and other
countries.

* Other names and brands may be claimed as the property of others

Copyright (c) 2001–2010, Intel Corporation. All rights reserved.

***************************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
***************************************************************************
INTEL SOFTWARE LICENSE AGREEMENT (OEM / IHV / ISV Distribution & Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

Please Also Note:
* If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV), this complete LICENSE AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies.

For OEMs, IHVs, and ISVs:

LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to you a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to:
a) use, modify and copy Software internally for your own development and maintenance purposes; and
b) modify, copy and distribute Software, including derivative works of the Software, to your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single User License Agreement, attached as Exhibit A; and
c) modify, copy and distribute the end-user documentation which may accompany the Software, but only in association with the Software.

If you are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then you may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation) to your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease, or in any other way transfer or disclose Software to any third party. You shall not reverse- compile, disassemble or otherwise reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or right is granted to you directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect your relevant records to verify your compliance with the terms and conditions of this Agreement.

CONFIDENTIALITY. If you wish to have a third party consultant or subcontractor ("Contractor") perform work on your behalf which involves access to or use of Software, you shall obtain a written confidentiality agreement from the Contractor which contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose.
Otherwise, you shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.


EXHIBIT "A"
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by more than one user.
5. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.

SLAOEMISV1/RBK/01-21-00

LANGUAGE; TRANSLATIONS. In the event that the English language version of this Agreement is accompanied by any other version translated into any other language, such translated version is provided for convenience purposes only and the English language version shall control.



-------

Подскажите, как теперь быть с этими драйверами? Я думаю кто понимает, в этом поймет что за драйвера у меня для SATA с этого диска. Может их и можно поставить на XP попробовать? Или подобрать именно такие только для моего ноута и для ОС XP? Может всетаки получится убрать при переключении на ACHI, этот экран смерти и система пойдет не по ACHI. А потом уже драйвера можно найти для видео и т.д. На этот ноут, я видел в инернете на некоторые модели MSI, есть драйвера под XP определенно.